MDG's website is divided in parts, with direct access through click on the following banners:
- - - - -

ORMUS Index - Map - Links
Ormus Science: Index - Science 2 - Milewski - Deuterium - Miracule Water - Ascension Alchemy

### John MILEWSKI websites' extracts:

(pictures added) ## ORMUS IS A GAS, by John V. Milewski, November 19, 2003, Rev 3/18/04


In the 80's and 90's David Hudson coined the acronym ORMEs. This is a name for what he defined as a new state of matter. ORMEs is an acronym for "Orbitally Rearranged Monatomic Elements" . He demonstrated, through his very detailed experiments and multiple testing, that at least 13 of the transition elements (Co, Ni, Cu, Ru, Rh, Pd Ag, Re, Os, Ir, Pt, Au, Hg.), which are in the center of the periodic table, can exist in a heretofore-unidentified state of matter. He claimed that this occurs when they are in a monatomic state.
He found that in this state they are very chemically inert. In conventional chemistry it is believed that all chemical reactions between elements take place because of the action of their outer electrons. Now, what David Hudson deduced, was that when these transition elements exist in a monatomic state and are not sharing or swapping their electrons with their near neighbors in a material structure like a crystal lattice, they become ORMEs elements.
At this stage the outer electrons of these elements form cooper pairs and become whirlwinds of light rotating at super speeds around the atom. Again, as a result of this change they lose all conventional chemical reactivity. Another important change that takes place is that the whirling electrons that have become light set up a Meissner antimagnetic field. This antimagnetic field causes a levitating force against the earth magnetic field and the element effectively loses 4/9's of its weight. According to Hudson, at this same time the nucleus becomes high spin and shrinks to about 1/3 of its original size and distorts to an oblong shape. When in this state as a single atom it should be a very small and very chemically inert atomic gas.

We are postulating that the free atom Ormus form of these 13 transition atoms is a very chemically inert gas. We also postulate that they are very small in relation to their masses and are surrounded by a very strong antimagnetic field. As a result of these properties we suspect that our atmosphere contains a significant amount of these gases. If this is true we would expect them to blend into our atmosphere and be easily mistaken for other gases such as argon, nitrogen and CO2, which might have similar weight and vapor pressure.
In addition to existing as a gas and because of their small size and chemical inertness they would easily diffuse into matter both liquids and solids. It has been suggested that they are captured in water structures and in most crystal structures such as quartz, magnetite and marble just to name a few. We think that their antimagnetic field helps them stay centered in the electric and magnetic fields found in the lattice structure.
During physical and chemical activity of these retaining structures, the Ormus elements would remain invisible to ordinary detection methods.


Gold Grows
In the summer of 2003 I reexamined some samples that had been processed on December 2, 1998 and March 3, 1999. There are four samples that were processed in 1998 in which hundreds of beads of gold (50 to 500 microns in diameter) were produced from container glass along with significant amounts of what appears to be Ormus material.
The gold bead in Photo 1 is about 500 microns in diameter and the string of beads in Photo 2 range from 10 to 50 microns in diameter. (Photos 1 and 2) The report on this will be given later in this paper.

Photograph 1:

Photograph 2
The March 03, 1999 sample was saved, because it also had a small amount of blue Ormus in the glass portion of the sample. It was stored in a sealed polyethylene plastic bag, (Photo 3).
Photograph 3 – 2X magnification
This piece of glass was melted and attached to a fused piece of magnetite.
Upon this new examination, the magnetite portion of the sample was discovered to have about 50 beads of gold attached to its surface. These beads ranged in size from 20 to 1500 microns in diameter that were not there in 1999 when the sample was stored away for saving. (Photo 4)
Photograph 4 – 2X magnification
The gold appears to be growing on the opposite side of the magnetite, about ½ inch away from the small spot of blue Ormus glass. A very significant addition to this sample is a small duplication for this gold growing event, where another an even smaller spot of blue Ormus glass is found and about Ό inch away a few small spots of gold are also growing.
Because of its surface structure, I believe that the gold is growing. The surface is not smooth as would be the case in melted gold but it has projections that appear to be reaching out and collection material from the air as can be seen in the enlarged pictures below. (Photo 5, 6)
Photograph 5 — 10X magnification

Photograph 6 — 30X magnification :

This is not basal growth but tip growth. It is theorized that the gold comes from the surrounding air.
The sample was stored in a sealed plastic bag. Apparently the small gold atoms diffuse through the bag and then were attracted to the magnetite substrate by the energy field set up by the Ormus at the base to react to form metallic gold. For some reason not fully understood the Ormus gold is converted to metallic gold as the atoms touch the surface of the magnetite.
It could be the increased magnetic field surrounding the magnetite or the ability that magnetite has to either give up or receive electrons, alone or in combination with the special energy field sent up from the Ormus gold below in the glass.
This magnetic effect could be related to direct interaction of the magnetite with Superlight (magneto-electric) energy. I believe that Superlight is an extremely energetic all prevailing dynamic Aether. You can read more about Superlight at the following web site:

White Powder of Gold grows
For the past several years I have performed many fire assay analyses. During this process about 90 grams of assay glass is left over after the lead button is separated from the molten glass. This glass was saved and stored in sealed plastic bags. Some of these bags were stored outside in a plastic tray where they were and exposed to occasional rain. (Photos 7, 8, 9, 10)
Photograph 7
Photograph 8

Photograph 9 :

Photograph 10
Upon examination of these samples after about 6 months of exposure to the elements, I found that they all were coated with a heavy white powder deposit. In about a year and a half about 60 grams of powder was collected after each 6 months period.
I believe that most gold or platinum group metal ores not only contain the ore element as a metal but an even a greater amount of the ore element in the Ormus form. I suspect that during the assay process most of the metal in the ore is extracted by the lead and the Ormus portion of the precious metal stays in the glass portion of the assay liquid. If this is so, the glass portion would contain a substantial amount of Ormus material. I suspect that this Ormus material in the glass is the force that is attracting additional material out of the air and water to form the white powder.

Another source of white powder
I live in Albuquerque, NM near the Sandia Mountains. For the past 10 years I have been hiking up the mountain trails near the tram where there is a service road to the first service tower. The hike to the tower is about 1 ½ miles long where you climb about 400 feet in elevation above the parking lot at the tram home base. In the past few years and more especially in the past 6 months I have observed that there is a significant amount of white coating on many of the rocks along and beside the trail. Many call this substance "Caliche" a presumed calcium carbonated material.
Prior to living in Albuquerque I lived in a town call White Rock near Los Alamos National Laboratories where I worked. The town was called White Rock because many of the rocks around the town were covered with this same mysterious, ill-defined, white coating. The town of White Rock is built on a large lava flow. I believe that the lava contains significant amounts of Ormus glass in its structure and is also very strongly paramagnetic. I believe that these properties help attract the white powder to form the heavy white coating on the rocks and lava beds at White Rock, NM.
Now that I am paying attention, I see this white coating on many rocks in many places in town, around the state and in Colorado also. I have seen it on small pebbles about 1 inch in size and larger nearly round boulders greater then 8 feet in diameter. I have seen it on granite, sand stone and it is especially heavy on the large broken lava rocks that are used on the side of roads and stream bed supports.( Photos 11,12,13,14)
Photograph 11
Photograph 12

Photograph 13 :

Photograph 14
At first I thought this white material was deposited from underground hot spring deposits, but there are no hot spring around nor have there ever been. In most all cases the boulders and pebbles are free standing on the surface and not attached to bedrocks. Also these rocks are mostly round and have the coating on two to four sides.

Where Does This Coating Come From?
I believe that the atmosphere is the source of the white powder and that it grows on rocks, to which it is attracted, by some force within the rocks. I presume that this force comes from the Ormus glass in the lava rocks that cause such heavy coatings and that the other variety of rocks like the granites, sandstone's, etc. must have a paramagnetic like nature that causes the attraction. The coating material comes from the air and even more so when there is a light rain like we get here in the desert. The rain captures the Ormes on the way down and deposits them on the rocks where some of it is attracted to stay. If there is not too much or too heavy of a rain it does not wash away and after drying up it hardens into a permanent coating of white powder.
Experimental Process For Conformation.
A set of experiments are being started to explore and try to understand what is going on in this coating process.

The Effects of "Magnetic Water" , by John V. Milewski, Revised February 10, 2004
About 6 months ago, I started drinking what I call magnetic water as a means of energizing my body. After a month or so, an unusual effect started to show up.
A friend of mine Bob S first noticed it. I had introduced him to the methods of making magnetic water and he under took an experiment and then went a little further with it than I did.
He processed his water for about 5 days and was drinking 3 cups a day, while I was only processing it for 2 to 3 days. He reported to me that his hair was turning dark, especially in the back of his head near the neckline. As time went on, this effect spread upward and moved more toward the front of the head. Now after about 6 month his hair is about 95 % darker in the back and about 80% darker on the sides and front, and his beard about 50% darker.

At that time, which was about 3 months ago, I started watching my own hair. Before I started drinking what I call "magnetic water" my hair was about 90% gray, and the hair on my beard and mustache was 100% gray. I did not know the effect this energized water could have on one's hair, so I was not watching for it the first few months I was drinking the water. So, when I did first notice it, the hair on the back of my head had already turned about 30% darker. I have now upgraded my processing facility, which makes it possible for me to have "5-day water".
Five-day water is defined as water that remains in the magnetic activation apparatus for a minimum of 5 days. Previous to that I was only using 2 to 3-day water. My wife and I now drink a minimum of 3 cups of this water a day and probably closer 5 to 6 cups.
What is very unusual about these changes is that the whole length of the hair changes at once from gray to dark. It doesn't just start at the root and grow out, but the whole length of the hair turns darker at once. You may have heard stories about people who have experienced a terrible shock in their life and their hair turns white overnight. Well, I believe this magnetic water has the reverse effect on a person, but to a much smaller degree - it occurs slower. It takes months to see the effect, but the positive effect is there and is real. You might say that this is a poor man's fountain of youth.

The apparatus for making this water
The apparatus for making this water is very simple. It consists of using an empty cylinder shape container, like a large oatmeal container, that is about 5 inches in diameter. At the center, an 8-inch long length of a 3-inch diameter mailing tube is placed. In the space between the inner walls of the 5-inch diameter can and the 3-inch diameter mailing tube, the black magnetite sand is poured.
This makes a cylinder of magnetite about 1 inch thick surrounding the 3-inch diameter hole in the center. Into this hole a standard bottle of spring water is placed that is about 710 ml in size - this is about one-pint of water. It fits in very nicely. You put together a minimum of five of these units and allow the process to proceed. Then after five days, you take one bottle out everyday and drink the water and replace it with another.

This gives the water 5 days in these units for magnetic activation. The units should be placed at least 6 inches apart to get maximum concentration of the Earth's magnetic fields.

What I think is happening is that the magnetite, which is a strong magnetic susceptor is concentrating the earth's magnetic fields into it's cylindrical shape and the shape effect in turn sets up a magnetic spiral vortex in the core of the cylinder in which the water is stored. This in turn activates the water with this magnetic energy. I think this is the activating force for regeneration changes in our bodies as we drink it. The hair color restoration is the first sign of this regeneration happening. A second sign is that the fingernails are growing faster and stronger and the skin in spots seams to be getting smoother and softer with less skin tags.
A secondary effect is dental improvement. My friend Bob S. needed to go to the dentist to have two molars crowned followed by two root canals. He had been drinking the water for about two months before going to the dentist. The dentist had told him that he was going to have to do two root canals at $475.00 each before he could do the crowns.
When the dentist removed the old fillings he was surprised because he said that where the hole in the root was supposed to be, the molars had filled in calcified! He couldn't believe it! He said he had never seen anything like it. Bob S. was really happy because he saved $950.00! No root canal needed!!!
Another important improvement in the mouth is how it improves the gums. Before I started drinking magnetic water my dental hygienist would measure gum pockets in the 4 to 6 range and my wife's was 5 to 7 range. In six months while drinking the magnetite water the my pockets dropped to the 3 to 5 range and my wife's to the 4 to 6 range then after nine months my pocket dropped to the 2 to 3 range and my wife to the 3 to 5 range now after a year my pockets are all gone, tight gums and my wife's is in the 2 to 4 range. Also, my gums no longer bleed during brushing.
I started a friend of mine on this magnetic water about 3 months ago. To his surprise after a week of taking this water he finally realized that he had stop smoking. He just forgot that he was a smoker and no longer had any desire to do so. He says that for the past 11 years he had been trying to stop but he couldn't do it. Now it just happened on it own as if he never was a smoker. As of this writing - 3 months into the program - he has not started again.
There seams to be some positive spiritual effects also. I know that my intuition is better and my creativity more prolific. A possible sign that supports this idea is that the under side of my big toes have been itching and need of sever rubbing from time to time. If you look at a Reflexology chart you will see that this is the spot for the penile gland. This is your third eye or second site being stimulated. (Intuition maybe?)

I believe that the water activation process results from the stronger magnetic field inside the magnetite cylinder. This field produces clusters in the water producing tetrahedrons and octahedrons molecular shapes. In turn these special sacred geometric shapes act as nesting places for the Orme gases that are always present in the air and water and allow them to stop and nest there (See top of page more information about Ormus gases.)
This in turn brings into the water the special magnetic energies that come with the Ormus atoms. This special energy in turn is food for the soul or spiritual component of man. I believe as many others do that all permanent healing and regeneration first takes place in the spirit and then manifests into the body. So energizing the spirit makes sense.
The shape ot the magnetite crystal

The crystal structure of magnetite is unique and most likely is responsible for these effects. Magnetite is Fe3O4 and it has a basic cubic crystal structure. It manifests as an octahedron structure that looks like two pyramids base-to-base — Sacred geometry?
We see this same octahedron structure in the crystals of the magnetite as it becomes manifested in the clustered water. This then becomes another point or means of energy transfer to the water because both the magnetite and the clustered water have the same basic structure or geometric energy resonance. How convenient! This is just what we want to happen, and it does when we place the water in our magnetite generators.

The good things I see happening from drinking magnetic water are:
- Hair color returns
- Teeth self repair
- Guns improves
- Skin get smother
- Hair and fingernails grow faster
- Smoking stops with out notice
- Older person feel younger and responses and act younger in many ways
- Improved spiritual effect i.e. intuition and creativity.
- This is a poor mans fountain of youth

We have magnetite for sale. We recommend a starter kit of 50 pounds @ $5 per pound, that's $250 plus $1 per pound for S&H that's $50, total $300. This will make 6 units using about 8 pounds per unit. We sell a 25 pounds can for $175 including S&H. 10 pounds for $100 including S&H. 5 pounds for $60 including S&H.
Call John V. Milewski at 505-856-6259, Or, send your mail order to 2881 Tramway Place NE, Albuquerque NM 87122

- How David Hudson Discovered Mon-atomic Atoms

- The Wonderful World of Advanced Materials
A wonderful presentation of some of John's Work

- More Information about the Unique Properties of Water

- ORMUS Plants

- The Art of Healing Ourselves

- Using Hydroponics to Understand the Earth's Life Processes
On the Atomic Level

- Tommy's History of Western Technology

- Site Link List

- The Tortoise Shell "Science of Health" Newsletter
— Putting an End to All Disease on Our Planet —

- Tortoise Shell Life Science Puzzle Box – Front Page

------------------- zap to the top

## The Atomic ORME and S-ORME States, by John V. Milewski, November 19, 2003, Rev 3/18/04

— TECHNICAL OVERVIEW — ( "Written for the layman by a layman" — David Hudson — Cotton Farmer ) - David Hudson spent 8.7 million dollars learning this "Advanced Science".

# Special Properties of the "Transition Group Elements"
"The 38 elements in groups 3 through 12 of the periodic table are called "transition metals". As with all metals, the transition elements are both ductile and malleable, and conduct electricity and heat . The interesting thing about transition metals is that their valence electrons , or the electrons they use to combine with other elements, are present in more than one shell. This is the reason why they often exhibit several common oxidation states. There are three noteworthy elements in the transition metals family. These elements are iron, cobalt, and nickel, and they are the only elements known to produce a magnetic field external to their system." — Yinon Bentor —

# Transition Group Elements : — Description —

There is a group of elements found in the middle of the periodic table known as the "transition group elements":

1) One category of these is called the precious elements:
- Silver , and the "light platinum group" ( palladium , rhodium , and ruthenium ). These are called 3d transition group elements.
- Gold , and the "heavy platinum group" ( platinum , iridium , and osmium ). These are called 4d transition, group elements.

2) Another category of these are the non precious elements:
- Copper , cobalt and nickel . These are called 2d transition group elements.

These elements are known as "transition group elements". They are in an uncertain state as regards their positive or negative electro-charge behavior, hence the name "transition". Their valence. electron orbitals are always half filled or half empty. (Electrons in the outer shells of an atom are referred to as valence electrons. Different orbital states for electrons can hold only certain numbers of electrons. ) Elements with fewer electrons in the outer shells tend to be electro-positive, and those with more electrons in the outer shells tend to be electro-negative.

These transition elements possess a unique property in that the electrons in the Partially filled outer orbitals can interchange under the right conditions with electrons in the partially filled inner orbitals (d). This is the underlying basis of catalytic reactions. (A catalytic reaction is a chemical reaction that occurs much more rapidly than normal without the catalyst itself participating in the reaction.)

# Transition Group Elements : Atom Clustering and The Monoatomic State

Most atoms cluster in groups of at least two or more atoms. However, the transition group elements, because of their unique properties, can be found already existing, or can be created and are able to remain, in a stable single atom state. This is achieved by having no nearest neighbor closer than four angstroms and, therefore, by not being able to chemically bind with other atoms. This is called a "monoatomic" state.

In this state, these atoms interact in two dimensions, in a unique continuous linear movement between a strong repulsive force when close enough to each other, and a strong attractive force when moved apart at a certain distance. Only when the repulsive force is overcome, will these atoms aggregate to form a metallic union.

In metals, during the process of going from a many atom state to a monoatomic state, there is a disaggregation of the metal-metal bonds and a loss of the properties characteristically assigned to the description of a metal. Different transition elements have different critical atom cluster size which determine their metal characteristics and behavior. These characteristic physical properties are lost at different rates depending on the element involved. (For example, the critical cluster size for rhodium is five atoms; for iridium it is nine atoms.

Two or more atoms, up to thirty-three, of the same transition group element, when clustered together, are called "metal-metal" bonded. In these cluster sizes, they can not be called truly metallic. It takes a twelve atom cluster before they become electrically conductive. It takes thirteen atoms for their true metallic properties to begin to appear. It takes a cluster of thirty-three atoms before they become fully metallic, and will grow all by themselves. At thirty-three form a "face center cubic", a first basic growth structure of three dimensions solidly formed like a cube. In all these quasi metallic and fully metallic states, the atoms interact in three dimensions. In the monoatomic state, they are referred to as non-metallic and they interact in two dimensions.

In the monoatomic state, these elements have unique and consistent behavior. This is their true elemental state.

# Transition Group Elements : Superdeformed Nuclei, High Spin Low Energy in the Monoatomic State:

In the monoatomic state, the atoms of the transition group elements lose their chemical reactivity and change the configuration of the nucleus. This change in nuclear configuration seems to cause the electrical change that pacifies the chemical effect. It may be considered as the mono-atom internally compensating for the highly reactive chemical state.

The nuclear configuration changes because there is a correlation between the nuclear orbitals and the electron orbitals as to how full they are. In the nucleus, totally filled orbitals (harmonic) exclude the partially filled orbitals (anharmonic) by pushing them away. The nucleus almost divides into one filled, and one half filled. This is known as the "liquid drop" theory.

This condition is unique to these atoms. The newly shaped nucleus is called "superdeformed". Nuclear physicists have recently confirmed that these atoms will change their proton and neutron configurations when they have no nearest neighbor to di-pole and di-pole react with. They can observe one atom at a time in linear accelerators.

A normal nucleus is shaped non spherically (deformed) at a vertical (length) to horizontal (width) ratio of 1.3 to 1. It is very stable and is held together by the strong force. It takes one million electron volts to knock a proton out of the nucleus!

The nucleons of these monoatomic elements adjust their positions in the nucleus, such that the ratio of their length to width becomes 2 to 1. These "soft" nuclei (those having a number of protons within a certain range and half filled orbitals) deform more easily than normal nuclei. 0nly ten electron volts are needed to cause a superdeformed nucleus to break apart, and this can be done with a mere DC arc! (See discussion of gamma emission below.)

The presence of a superdeformed nucleus is directly correlated to a change in its spin state; it passes from a low spin state to a high spin state. It has been found that the nuclei of these elements have a higher total energy in a low spin state (their internal temperature is higher) than when they are in a high spin state (their internal temperature is lower). This causes the mono-atom to seek the high spin state because that state has the total lowest energy. Furthermore, this high spin state will continue to exist until such time as a nearest neighbor atom is able to transfer energy into the nucleus and convert it back to the higher energy low spin state. (This is called "pinning" in the superconducting industry.)

# Superconductivity

Researchers working with large magnetic fields discovered in the 1960's that metals when induced into a high spin state (using energies of approximately 540,000 gauss) were capable of passing energy from one high spin atom to the next with no net loss of energy! This was the discovery of superconductivity.

Superconductivity allows the conduction of energy through a resonance phenomenon. Unlike electrical conduction, energy can be passed from one superconductor to another with contact, without resistance and, therefore, with no net loss of energy.

To create superconductivity in a potential superconductor, an external magnetic field must be applied to get the system going. Once the flow of energy is set in motion, however, it is only necessary to keep the conditions correct so that the material remains superconductive. (Note: When it takes more energy to create a magnetic field to keep the atoms in the high spin low energy state than it would take to push electricity down a good conductor, the process is self defeating.)

Atoms could now be induced into a high spin state of low energy and be kept in that state without continuous applied energy boosts. The system currently in use, to induce atoms into a high spin state of low energy, is refrigeration combined with extremely high magnetic fields of approximately 540,000 gauss. The system now in use, to keep the atoms in the high spin state, is refrigeration to near absolute zero. All of this is an elaborate and expensive process.

# Transition Group Elements : Perfect Superconductivity in the Monoatomic State, Cooper Pairs and the Meisner Field

There are distinct differences between superconductors. A Type I superconductor is what we refer to as a perfect superconductor, with one single vibrational phase. A Type II superconductor contains ordinary metallic conductivity in conjunction with perfect superconductivity, two or more vibrational phases, and includes the many different systems in current use today.

A transition group element in the monoatomic state is a Type I superconductor. It is unique in that it can be found to exist naturally and in a stable state, or it can be reduced from a full metallic state to this state by proper manipulation. Furthermore, once in the monoatomic state, it does not require any outside assistance to maintain its superconductive properties, It is superconductive at room temperatures.

Perfect superconductivity is allowed due to a phenomenon known as "Cooper Pairing" which creates a "Meisner Field". Researchers have theorized that when the nucleus of a transition group element is superdeformed and in the high spin state, a positive "screening potential" around the nucleus (the positive field produced by the nucleus that screens all but the valence electrons) expands out and covers all of the electrons of the element. This screening of all of the electrons allows them to become uniquely paired as mirror images of each other, with spin up and spin down, and without annihilating each other. Instead, in pairing they become, photons of one frequency. As photons, they lose their particle aspect. These are called "Cooper pairs".

A Nobel prize was given to Bardeen, Cooper and Schreiffer for having identified this pairing mechanism. However, this was theory only, and the researchers are not yet aware of the actual existence of this condition in the mono-atoms of the transition group elements nor of the perfect superconductivity of these atoms in this state.

Superconductive flow is made possible by Cooper pairs made up of photons flowing on the quantal (phonon) wave of the superconductor. This occurs at room temperature!!

{Quanta (called photons) are waves of light. A photon is the name given to the quantum of energy released when an electron goes from an outer orbital to a lower orbital in the atom. Photons are bosons, pure waves, the bearers of light. They have spin one characteristics and obeys certain laws. Electrons are fermions and have spin one-half characteristics and obey other laws.}

When the screening potential occurs, each atom produces a Coulomb wave in two dimensions as it resonates. The phenomenon of the screening potential, associated with a single atom, can also be observed when many single atoms are proximate to each other, but not nearest neighbors, i.e., the atoms must remain monoatomic, and their relation to each other must allow the two dimensional resonance to continue.

These arrangements, only possible with mono-atoms, are found uniquely in the transition group elements, which can remain stable and naturally in the monoatomic state. Mono-atoms of other elements, are unable to remain stable in the monoatomic state because they do not have "soft", and superdeformed nuclei, nor can they enter then, into the high spin state. Therefore, since there is not sufficient repulsion between atoms, they naturally aggregate and can only interact with each other in the three dimensions of the metal-metal bonded states, and will eventually grow into the cubic cluster size of thirty-three atoms or more. (See special case of copper below.)

When many single atoms are proximate to each other in the monoatomic state, the screening potentials of each atom will now respond to an external applied magnetic field by joining and producing a phenomenon which allows the formation of a special magnetic field called a "Meisner field". This field has been observed in atoms of metals by researchers at two and three degrees Kelvin, i.e., at extremely cold temperatures, but these atoms will always return to a normal metallic state once the temperature is raised. Until Hudson's work, the Meisner field has never been seen in atoms at room temperatures. It has been extremely expensive to produce these atoms in this superconductive state with existing technology, and therefore not commercially viable. (This phenomena can be utilized to levitate vehicles capable of transporting humans or heavy loads with a minimum of energy. This phenomenon accounts for rapid train systems world wide, but their energy savings in propelling the vehicle are offset by the refrigeration costs of cooling their superconductors.)

The Meisner field is a special magnetic field , that is unique. It has no North or South polarity. The magnitude of the Meisner field is determined by the amount of initially applied external magnetic field to the superconductor. Once activated, it acts as a protective barrier and resists any further entry of applied magnetic field into the sample. (When a sample absorbs a magnetic field, it can react paramagnetically, i.e., it will assume the identical magnetic qualities, or it can react ferromagnetically, i.e. it will orient itself to the magnetic field and return to its former state once the magnetic field is removed. With the Meisner field, the sample becomes perfectly diamagnetic, i.e., it will expel all magnetic fields. Magnetic fields, no longer absorbed, are forced to go around the sample, and the sample will be unaffected and keep its unique superconductive qualities.)

Instead of absorbing the external applied magnetic field, the atoms near the resonating mono-atom producing the Coulomb wave in two dimensions, will now "respond" to it by nestling in a resonance wave (at distances greater than four angstroms) and the wave will perpetuate, from one atom to the next, ad infinitum, creating more and more Cooper pairs or photons (flowing light) within the sample. The system of the many atoms actually has the same physics as that of a single atom.

What is unique about the transition group elements in this state is that the Meisner field, once created, will not cease its response even if the external magnetic field is withdrawn. Instead, the photons will continue to be created and the wave flow will continue to flow. Now the superconductor is apparently superconducting on its own.

To resume, the transition group elements with their superdeformed "soft" nuclei all resonating to a single frequency, in their high spin low energy state, becoming a wave flow of light in a resonant unified entity, are a resonance coupled system of quantum oscillators, harmonically coupled in two dimensions. Once the Meisner field is activated, the transition group elements are unique in that they become a "quantal wave". Energy now flows on a quantal wave perpetually.

This effect is believed by Andre Sacharov, Harold Putoff and others to be caused by a universal energy , called Zero Point Vacuum Energy ( Super Light , Ether, Tachyons). It is the natural free energy of the vacuum which is the stimulus, which acts as a natural applied external magnetic field, and makes it possible for these, and only these, natural perfect superconductors to respond as they do.

Indeed, these pure single element superconductors are extremely sensitive to external magnetic fields, and can respond to those of extremely low potential. A single element superconductor can respond to a magnetic field of 2 times 10 to the minus 15th (2–15) power ergs. (That is .0000000000000002 of 1 erg!) The earth's magnetic field is approximately 0.78 gauss. There are 10 to the 18th power (1018) ergs in a gauss. Therefore, these perfect superconductors will respond dramatically to the earth's magnetic field, as well as to fields surrounding the human body. (This is important to understand to explain their role in biological processes.)

We now have individual atoms running in perfect unison with each other producing a quantal wave upon which energy can flow as long as the atom can derive its energy from the vacuum. Therefore, it is no longer necessary for a manmade system to keep the flow alive, i.e., in a superconductive state.

# Josephson's Junctions:

When two atoms or more are perfectly superconducting, they resonance-connect and expel external magnetic fields. However, there is a limit to a superconductor's capability to exclude external magnetic fields. This is referred to as HC 2. If that amount of magnetic field is applied to the sample, all resonance coupling collapses. This phenomenon is utilized as an electronic switch, called a Josephson Junction.

Applying sufficient external magnetic field will stop the flow of energy in the superconducting system and switch it off. Releasing the external magnetic field will turn the switch is on. Being able to use Josephson's Junctions for superconductive devices at room temperature will be extremely valuable.

# DC Arc Emission Spectroscopy and X-ray Analysis of Metals :

When analyzing these transition group elements in the monoatomic high spin state by standard spectroscopic analysis (which is based on reading the characteristic emission or absorption of the energy caused by knocking the electrons from one location to another in the atom), the analysis becomes impossible because the atom no longer has individual electrons, only Cooper pairs. The electrons have paired to become photons and no longer exist in "space-time" or at any specific location as particles; they are waves of light. Therefore, the monoatomic elements remain "hidden".

When analyzing the atoms in these elements in the monoatomic high spin state by X-ray spectroscopy, they still can not be seen, even if they are aggregated by taking them to a low spin state and forming metal-metal bonds. The dimensions between the atoms range from 1.8 to 2.2 angstroms. To be seen by X-ray, their overall dimensions must be fifteen angstroms or larger to match the fifteen angstrom wave length of the ray, so that the ray can strike the particle twice for it to be seen. This would take approximately thirty atom clusters in three dimensions. Mono-atoms are, therefore, X-ray amorphous.

In order to identify the transition group elements in the sample, Hudson prepared the sample into a metal-metal bonded state, just sufficiently "metallic" to be read by the Russian system of spectroscopy developed at the Soviet Academy of Sciences. Standard spectroscopy requires a more fully metallic state in three dimensions before the elements will read.

# David Hudson's Discoveries :

David Hudson discovered that the monoatomic state can exist naturally and remain in a stable state in the transitional group elements. (ORME) He also discovered that in this state, the atoms can join to become a many atom resonance coupled system of quantum oscillators, resonating in two dimensions, indeed perfect superconductors, at room temperature. (S-ORME)

Hudson discovered that the precious elements, in the group of transitional elements, could be found in a monoatomic form in certain ores and that by a chemical method, he could separate them out from these ores. The high spin low energy state is stable and naturally maintained. it needs no external manmade manipulation. The internal temperature of the atom is measured to be almost zero degrees Kelvin .(approximately three degrees). This is a naturally cold state. It is, in fact, a perfect superconductor.

Hudson also discovered that he could prepare these mono-atoms from commercial metallic forms of the transitional group elements as well, and maintain them in this state by removing the chemical and crystalline energy. This is achieved by providing another element that is highly reactive and which has a chemical affinity for the transition element. When they react, they form a compound of the two elements. Through a process of replacement chemistry, hydrogen is exchanged for the reactive metal. The hydrogen transition metal compound is chemically removed from the solution and the hydrogen is thermally annealed from the sample. It is inherent in these precious elements to convert to the high spin state if this particular sequence is followed. This process is permanent and does not have to be continuously applied. It is also infinitely less expensive than the traditional refrigeration process.

Hudson's material can be considered as literally billions of atomic Josephson Junctions. Hudson's discovery provides superconductivity at room temperature and is extremely valuable in all electronic and power applications.

{Note: Hudson's explanation for the unexplained energy released in cold fusion studies is that the palladium electrode is converting to the high spin state over a period of several days using lithium deuterate, (provided by the experimenter) as an electrolyte which enables the breaking of the metal-metal bonds of the atoms into the monoatomic superdeformed high spin state.}

# Gamma Emission :

In Hudson's early research, before he realized the value of the monoatomic high spin state, he attempted to force mono-atoms to the low spin state by the application of extremely high energy in order to make metal out of the mono-atoms. Using an arc furnace (a water cooled copper crucible with a tungsten electrode mounted above it and all atmosphere controlled) and an argon gas as the plasma gas, Hudson struck an arc on the sample and within one second, totally destroyed the tungsten electrode.

Estimations of the heat (BTUs) being generated far exceeded any chemical energy possible. Hudson was sufficiently concerned that since 1982 he has not attempted to reproduce the procedure. He suspected a nuclear level energy release to be causing the phenomena.

In 1991, Hudson found an article in Scientific American in which Berkeley Brookhaven had observed that superdeformed high spin atoms, when subjected to external magnetic fields sufficient to affect the nuclear quadripole moment, would cause the nucleus to emit gamma radiation without fissioning. The research physicists doing the testing at Berkeley Brookhaven was amazed at their findings. They had indeed confirmed Hudson's suspicions about his material.

Without the use of linear accelerators, nuclear level gamma emission can be induced to emit from the ORMEs in Hudson’s material with the simple application of a DC arc. This discovery has tremendous energy production capabilities.

# Biological Effects :

When Hudson became aware that the precious elements in this superdeformed high spin state could not be analyzed by standard instrumental analysis, he realized that they could exist everywhere undetected. There are many published papers where superconductivity has been observed in biological systems. However, no-one has yet understood where the superconductivity is originating.

Using the Russian system of spectroscopy, analyzed pigs' and calves’ brains and discovered that an excess of five percent by dry matter weight of the tissue was rhodium and iridium in the high spin state. Hudson suspects that the human body also contains quantities of these elements in the monoatomic state.

Nitric oxide is a compound that dramatically pins these elements (causes the high spin atoms to go to the low spin state). The air contains normally about one percent nitric oxide. Every breath of air provides nitric oxide which "kills" the high spin state of these atoms in the body. In performing this chemistry, nitric oxide causes the screening potential of these atoms to withdraw and removes one of the Cooper paired electrons which comes under the control of the nitrogen atom.

When this occurs, the electron is annihilated along with one of the nitrogen electrons, and produces a one million electron volt photon (gamma level radiation), which is absorbed by the nucleus of the nitrogen atom.

This has a sufficient level of energy to remove the positive charge from a proton of nitrogen. The excess neutron now causes the nitrogen atom to become a carbon atom with 14 nucleons, i.e., with this an extra neutron to become radioactive carbon 14. Hudson believes this is the reason that radioactive carbon 14 is continually being created in all living creatures. (radioactive carbon dating is the Standard method of dating the age of past living system)

In as much as we can not remove nitric oxide from the air, the detrimental effects can be offset by adding more of these precious elements in the superdeformed high spin state to our diet.

Recently there have been articles in the medical literature indicating the emerging value of precious metal salts for anti-tumor activity. However, the researchers are unaware of the reason the beneficial effect. Hudson believes it is due to the change in the physical condition of the salts that occurs in the aqueous saline solutions in the body. If the cluster of atoms in the salts is sufficiently small, they can dissolve to the monoatomic state.

Hudson believes that these elements in their monoatomic state correct DNA and are, in fact, the "light of life". His research into this use of monoatomic rhodium and iridium is ongoing. To date, they are showing to have enormously beneficial results with terminal Aids and cancer patients.

# Note on Copper

Copper is used today in Type II superconductors, in the form of yttrium barium copper oxide. It is indeed a high temperature superconductor, but in order to maintain its monoatomic state at room temperature, it needs the matrix of yttrium , barium and oxide to keep its atoms at the requisite distance from each other and to function in two dimensions. Other wise it will form metal-metal bonds, become increasingly metallic and lose its superconductive behavior.

Also see ...
- "Understanding Colloidal Suspensions"
- m-state (ORMUS) materials dissolved in water.

— New Hudson Page —
- David Hudson's " Grand Science Adventure "
"David Hudson at the Ranch" — November 16, 1995

- The Make Up of Our "Engineerable Atomic World"
- The Wonderful World of Advanced Materials
- The Resonate Coil Project
- Maxwell's Equations in Magnetic Media
- Site Link List
- Element List
- Hydroculture Salts
- The Tortoise Shell Life Science Puzzle Box – Front Page

------------------- zap to the top

## Periodic Table of Elements

We have Named each "Atomic Form", that has Stable, Useful, Properties. There are 98 Atomic Forms, that occur Naturally, with some abundance.

— Important Bio-Atoms (see original webpage to view Periodic Table)

Our Natural Planetary Family of Atomic Forms, Join Together in various Dances, to make Many Billions of Different Molecules.

Our Whole 3-D World, is Really, One Big Dance of Atomic Forms, All Constantly Moving in Patterns and Rhythms.

Metallic Elements in general are distinguished from the non-metallic elements by their lustre, malleability, conductivity and usual ability to form positive ions.

Non-metallic Elements are not malleable, have low conductivity and never form positive ions.

Element Symbol Atomic
Valence Orbits Crystal Ionic Radii of Elements
Radius in Angstroms @ Charge
Actinium Ac 89 227 3 2,8,18,32,18,9,2 1.18+3
Aluminum Al 13 26.98 3 2,8,3 0.51+3
Americium Am 95 [241] 3 + 2, 4 2,8,18,32,24,9,2 1.07+3
Antimony Sb 51 121.76 3, 5 2,8,18,18,5 0.76+3
Argon A 18 39.944 0 2,8,8
Arsenic As 33 74.91 3, 5 2,8,18,5 2.22-3   0.58+3   0.46+5
Astatine At 85 [210] ? 2,8,18,32,18,7
Barium Ba 56 137.36 2 2,8,18,18,8,2
Berkelium Bk 97 [243 or 244] ? 2,8,18,32,26,9,2
Beryllium Be 4 9.013 2 2,2
Bismuth Bi 83 209.00 3, 5 2,8,18,32,18,5
Boron B 5 10.82 3 2,3
Bromine Br 35 79.916 1 to 7 2,8,18,7
Cadmium Cd 48 112.41 2 2,8,18,18,2
Calcium Ca 20 40.08 2 2,8,8,2
Californium Cf 98 [244] ? 2,8,18,32,27,9,2
Carbon C 6 12.010 4 2,4 2.60-4   0.16+4
Cerium Ce 58 140.13 3, 4 2,8,18,19,9,2
Cesium Cs 55 132.91 1 2,8,18,18,8,1
Chlorine Cl 17 35.457 1 - 7 2,8,7
Chromium Cr 24 52.01 2, 3, 6 2,8,13,1
Cobalt Co 27 58.94 2, 3 2,8,15,2
Copper Cu 29 63.54 1, 2 2,8,18,1
Curium Cm 96 [242] 3 2,8,18,32,25,9,2
Dysprosium Dy 66 162.46 3 2,8,18,28,8,2
Einsteinium Es 99 [252] ? ?
Erbium Er 68 167.2 3 2,8,18,30,8,2
Europium Eu 63 152.0 3, 2 2,8,18,25,8,2
Fermium Fm 100 [257] ? ?
Fluorine F 9 19.00 1 2,7
Francium Fr 87 [223] ? 2,8,18,32,18,8,1
Gadolinium Gd 64 156.9 3 2,8,18,25,9,2
Gallium Ga 31 69.72 3, 2, 1 2,8,18,3
Germanium Ge 32 72.60 4, 2 2,8,18,4
Gold Au 79 197.2 1, 3 2,8,18,32,18,1 1.37+1   0.85+3
Hafnium Hf 72 178.6 4, 3, 2 2,8,18,32,10,2
Helium He 2 4.003 0 2
Holmium Ho 67 164.94 3 2,8,18,29,8,2
Hydrogen H 1 1.0080 1 1 1.54-1
Indium In 49 114.76 3, 2, 1 2,8,18,18,3
Iodine I 53 126.91 1 - 7 2,8,18,18,7
Iridium Ir 77 193.1 3, 4 + 1, 2 2,8,18,32,17
Iron Fe 26 55.85 2, 3 2,8,14,2
Krypton Kr 36 83.80 0 2,8,18,8
Lanthanum La 57 138.92 3 & 2 (?) 2,8,18,18,9,2
Lawrencium Lr 103 [262] ? ?
Lead Pb 82 207.21 2, 4 2,8,18,32,18,4
Lithium Li 3 6.940 1 2,1
Lutetium Lu 71 174.99 ? 2,8,18,32,9,2
Magnesium Mg 12 24.32 2 2,8,2
Manganese Mn 25 54.93 2,3,4,6,7 2,8,13,2
Mendelevium Md 101 [258] ? ?
Mercury Hg 80 200.61 1, 2 2,8,18,32,18,2
Molybdenum Mo 42 95.95 3, 4, 6 2,8,18,13,1
Neodymium Nd 60 144.27 3 & 4(?) 2,8,18,22,8,2
Neon Ne 10 20.183 0 2,8
Neptunium Np 93 [237] 3, 4, 5, 6 2,8,18,32,22,9,2
Nickel Ni 28 58.69 2, 3 2,8,16,2
Nb 41 92.91 3, 4, 5 2,8,18,12,1
Nitrogen N 7 14.008 3, 5 2,5
Nobelium No 102 [259] ? ?
Osmium Os 76 190.2 2, 3, 4, 6, 8 2,8,18,32,14,2
Oxygen O 8 16.0000 2 2,6
Palladium Pd 46 106.7 2, 4 2,8,18,18
Phosphorus P 15 30.975 3, 5 2,8,5
Platinum Pt 78 195.23 2, 4 2,8,18,32,17,1
Plutonium Pu 94 [239] 3, 4, 6 2,8,18,32,23,9,2
Polonium Po 84 210 4 occ 2 rarely 6 2,8,18,3218,6
Potassium K 19 39.100 1 2,8,8,1
Praseodymium Pr 59 140.92 3, 4, & 5(?) 2,8,18,20,9,2
Promethium Pm 61 [147] ? 2,8,18,23,8,2
Protactinium Pa 91 231 not lower than 5 2,8,18,32,20,9,2
Radium Ra 88 226.05 2 2,8,18,32,18,8,2
Rn 86 222 ? 2,8,18,32,18,8
Rhenium Re 75 186.31 4, 6, 7 2,8,18,32,13,2
Rhodium Rh 45 102.91 3 2,8,18,16,1 0.68+3
Rubidium Rb 37 85.48 1 2,8,18,8,1
Ruthenium Ru 44 101.7 1,2,3,4,6,7,8 2,8,18,15,1
Samarium Sm 62 150.43 3, 2 2,8,18,24,8,2
Scandium Sc 21 44.96 3 2,8,9,2
Selenium Se 34 78.96 2, 4, 6 2,8,18,6
Silicon Si 14 28.09 4 2,8,4 2.71-4   3.84-1   0.65+1   0.42+4
Silver Ag 47 107.880 1, 2 2,8,18,18,1
Sodium Na 11 22.997 1 2,8,1
Strontium Sr 38 87.63 2 2,8,18,8,2
Sulfur S 16 32.066 2, 4, 6 2,8,6
Tantalum Ta 73 180.88 5 also 4, 3, & 2 2,8,18,32,11,2
Technetium Tc 43 [99] ? 2,8,18,13,2
Tellurium Te 52 127.61 2, 4, 6 2,8,18,18,6
Terbium Tb 65 159.2 3 & 4 2,8,18,26,9,2
Thallium Tl 81 204.39 1, 3 2,8,18,32,18,3
Thorium Th 90 232.12 4 2,8,18,32,19,9,2
Thulium Tm 69 169.4 3 2,8,18,31,8,2
Tin Sn 50 118.70 2, 4 2,8,18,18,4
Titanium Ti 22 47.90 2, 3, 4 2,8,10,2
W 74 183.92 6, 5, 4, 3, 2 2,8,18,32,12,2
Uranium U 92 238.07 6, 5, 4, 3, 2 2,8,18,32,21,9,2
Vanadium V 23 50.95 2, 3, 4, 5 2,8,11,2
Xenon Xe 54 131.3 0 2,8,18,18,8
Ytterbium Yb 70 173.04 3 2,8,18,32,8,2
Yttrium Y 39 88.92 3 2,8,18,9,2
Zinc Zn 30 65.38 2 2,8,18,2
Zirconium Zr 40 91.22 4 also 3 & 2 2,8,18,10,2

------------------- zap to the top